Eurotech Eco4 Radiant

Over Floor Heating System – Retrofit Without Digging Up Floors

CLAIM YOUR FREE QUOTE AND START SAVING

COMPLETE THE FORM TO RECEIVE YOUR FREE QUOTATION

Property Type

No. Bedrooms:

No. Bathrooms:

Do  you  have  a  Water  Cylinder?

Do you have Smart Heating Control System?

No More Oil & Gas

400% Energy Efficiency

EUROTECH

ECO4 RADIANT

Over Floor Heating System

OVER FLOOR HEATING - Eco4 Radiant

The system consists of a series of low-profile panels that are laid on top of the existing floor.

FIND MORE

Get a Free Quote

UNDERFLOOR HEATING

The system consists of a series of low-profile panels that are laid on top of the existing floor.

FIND MORE

Get a Free Quote

OUTDOOR MELTING

Outdoor warming and melting systems are designed to provide heat and melt snow or ice in outdoor spaces.

FIND MORE

Get a Free Quote

Eurotech Eco4 LIVING Energy Efficiency

RETROFIT FLOOR HEATING  WITHOUT DIGGING UP FLOORS

EUROTECH Eco4 Radiant – a new way of life

I would like to introduce our solution to achieve low-cost heating while significantly improving the BER rating. Eco4 Light, Structural and Living Over-Floor Heating System, this system is designed to replace traditional radiators and enable easy access to efficient heat pump technology.

  • This innovative system, only 25mm thick, can be installed directly over existing timber floorboards, plywood, concrete, or tiled floors. It is highly versatile and applicable to various types of buildings, including Georgian and heritage properties, churches, and office spaces. By replacing radiators, Eco4 Light not only reduces energy consumption but also facilitates the switch to heat pump technology, with potential energy savings of up to 70% for buildings with high ceilings.
  • The Eco4 light system operates at a very low flow temperature, which means it delivering greater comfort and consumes approximately 50% less energy when paired with a heat pump. Due to its minimal warm-up time and efficient operation, this system can revolutionize low-energy heating solutions.
  • The system features a self-adhesive structured panel that can be applied to any clean existing floor surface. Piping is laid into the structured panel, ensuring that the thermal screed fully encapsulates the pipe. This creates a clean, flat surface, ready for the final floor finish, whether tiles or timber. The thin thermal screed not only strengthens the floor but also adds fireproofing, allowing the system to efficiently transfer heat from the source to the living space.
  • Cooling is another valuable aspect of the Eco4 system. It offer superior cooling performance by effectively removing energy from the room when combined with stone-based flooring. The system’s high thermal conductivity allows for swift transitions between heating and cooling, creating added value for customers and providing comfort cooling without the sensation of drafty cold air.
  • In new builds, Eco4 Light allows both heating and cooling to be achieved using the same heat pump, without any need for additional investment. For heritage buildings, the system is ideal as it can be installed without invasive work and operates at low temperatures (30°C flow), making it a perfect match for heat pump technology. This combination improves the building’s energy efficiency, reduces its carbon footprint, and increases its value—both in terms of ownership and leasing potential.
  • Eco4 Light delivers delivers enhanced comfort to occupants while being discreet and protected from potential vandalism or damage.

Please download or request brochure for more detailed information.

Should you have any questions or require further assistance, feel free to reach out.

Eco4 Light

Fits over any timber joist system to form a radiant heated floor.

Eco4 Structural

Improves the strength properties of any existing floors.

Eco4 Living

Changing the way we live today, making comfort a reality.

Eurotech Eco4 Radiant System

  • Eco4 Living is comfort you can afford; this Revolutionary Floor Heating system is designed to fit over any existing floor and creates a minimum overall thickness of 25 mm, the system structure for load bearing is equal to the existing floor.
  • Eco4 Living is all about comfort: The floor heats fast and creates the warm room with uniform even heat across the heated area to eliminate cold spots and prevent convection currents.
  • Eco4 Energy Efficiency: The system is more energy-efficient than traditional systems, it uses less energy to heat the space and operates at a lower flow temperature, this will reduce the energy consumption and running costs.
  • Eco4 Living improves indoor Air Quality: The space is heated by dust free radiant rays that shine from the floor which are absorbed by the occupants like rays from the sun.
  • Eco4 Living creates a luxury feeling of Comfort and eliminates traditional fluctuation in heating.
  • Floors that are not level require additional screed thickness beyond 20mm to create a level flat floor finish.
  • Eco4 Space Savings: The entire room is heated by the floor, no mechanical equipment is required in the room, walls are available for furniture, offering greater flexibility.
  • Eco4 Value: Eco4 Light is fast to install, floor screed is reduced by 70%, curing time is 3 to 5 days, heat can be applied on day 3, floor finishes can be applied in 10 days.

Before

After

Church retrofit reduced primary energy from 300kW/h to 24kW/h using Eco4 Light

How to Transform Your Home

Get your free quote in 24 hours. SEAI grant application included.

10 Steps for an ideal Eurotech Eco4 Radiant

Your Project: 10 Steps to Comfort

From first contact to warm floors – our proven process.

Once you have decided on the areas you intend to heat or if it is the entire project, simply forward a set of floor plans with clear instructions and our design teal will do the rest.

Our engineers survey the plans, select the most suitable location for equipment, agree locations and design the Eco4 system.

Images to accompany plans on retrofit projects are beneficial to our design engineers in locating the Eco4 manifold.

Architectural features that may affect the installation can be highlighted and discussed to accommodate same.

Final detailed plan and layout diagram provided for agreement prior to costing the system or dispatching product.

Ask About Design

  • Cost estimating:

    Eco4 RADIANT is best costed by providing a floor plan for the area intended.

    A comprehensive list of equipment is generated to establish the cost.

    New construction projects should plan early in the process to take advantage of cost reductions created by Eco4 radiant in the overall budget.

    Domestic projects can also reduce costs, finished floor and subfloor screed can be combined into one, first floor will not require insulation, first or second floors decked in timber are ideal for Eco4 LIVING.

    Instalation time to install the system is reduced, screed thickness is reduced, drying out time is reduced, warm up time is instant.

    Design, supply and fit options, provide a clear breakdown of costs, fitting time, and screeding option if required.

    All Eco4 LIVING forms part of a renewable energy package with grant aid up to 40% available due to its effect on increasing system efficiency and operating cost.

    Get a Free Quote

There are two ways to precure the Eco4 Light system, one option is to source the system materials, supply only and engage an experienced installer to fit and commission the system on site. This option can include a system design document which can be provided following receipt of the required project information.

Alternatively, the Eco4 LIVINGis offered as a design, install and commissioned system. Once the design is approved, you can procure the necessary equipment, consult with the project manager, agree the instalation date and receive instructions required to prepare the site. Once the instalation date is agreed with the installation team preparations are in train to ensure a smooth and efficient installation process. Regularly communicate with the team is advised to update on project progress and align with the plan.

The necessary tools and materials:

  • Eco4 LIVING specification & design provided by Eurotech Renewables
  • Insulation boards are optional on request.
  • Piping system in cross-linked polyethylene.
  • Manifold system in Nickle coated brass
  • Overfloor Eco4 LIVING quick tray, structured support system.
  • We offers a wide range of products, including pipes connected with unions, clips, and brackets. Thermal fill material is optional, and they provide a pipe un-winder that supports rolls up to 500 meters. Additionally, their offerings include pipe cutters and crimping tools, along with pipe bending formers available on request.
  • Screws, adhesive, and fixing materials on request.
  • Valve actuators to fit manifold in 230V or 24Volt
  • Smart controls, wired version 12 Volt, includes logic programming and up to 32 heating zones on one system.
  • Wireless control option available with wi-fi connection.

Ask Technical Team

Eco4 LIVING is designed to fit over any existing floor, as a result preparations are divided into categories to match each application.

Category one; Timber Joist floor systems with floorboards or plywood deck.

  1. The timber decks must be thoroughly cleaned, building materials or adhesive must be removed to form a flat even surface like a tabletop.
  2. The floor deck must be washed, mopped, and dried fully before applying a suitable sealer to primer the floor.
  3. Once primed, no traffic is permitted prior to laying the Eco4 LIVING system.

Category two; Existing concrete floors, switching from rads. to Eco4 LIVING.

  1. Remove existing carpets, laminates, lino, or tiles, remove any adhesive used to secure the floor finish.
  2. Buff of tile adhesive using a diamond cutting disk or similar.
  3. Level existing floor where necessary to form a flat finish.
  4. Clean and dry existing floors and seal each floor using a suitable primer.

Category three; Concrete floors in new construction projects

  1. New concrete ground floors with Radon, insulation and concrete screed require a smooth flat finish on the concrete screed, Eco4 LIVING may be applied directly over the finished concrete surface to form an additional 20-25mm finished floor, towards the end of construction.
  2. Concrete floor surface must be clean and dry before applying a suitable primer in preparation for the system.
  3. Upper-level concrete floors do not require insulation, Eco4 LIVING may be fitted directly over the concrete screed once prepared, to form the finished floor.

Ask Technical Team

  • Follow the provided instructions to mount the manifold and control system in the designated location.
  • Connect the flow and return pipes to the manifold.

Ask Technical Team

Before covering the pipes, conduct a pressure test to ensure there are no leaks. Follow the instructions provided by Eurotech Renewables for this step.

Depending on the flooring material you plan to use, cover the PEX pipes with suitable insulation, such as screed, self-leveling compound, or insulation boards.

Ask Testing Team

Lay the PEX pipes

  • Starting from the manifold, lay the PEX pipes according to your layout plan, ensuring proper spacing between pipes (usually around 150-200 mm).
  • Secure the pipes in place using clips or brackets.
  • Avoid sharp bends or kinks in the pipes to maintain optimal water flow.

Conect the pipes:

  • Use the provided connectors to join the pipes together, following Eurotech Renewables’ guidelines.
  • Crimping tools or other suitable methods to create secure connections.

Ask Technic Team

Follow the instructions provided by Eurotech Renewables to install the thermostat in a suitable location. Ensure proper electrical connections and programming.

Ask Technical Team

  • Once the installation is complete, fill the system with water and follow the startup procedures provided by Eurotech Renewables.
  • Test the underfloor heating system to ensure it’s functioning properly.
  • Make any necessary adjustments or corrections if required.

Ask Testing Team

Ask Technical Team

Are you considering a Eurotech Eco4 Radiant Over Floor Heating System?

Contact us today for advice

ADDRESS

Eurotech Renewables Ltd.
Rossullus Walk,
Castleblayney,
Co. Monaghan,
Ireland. A75 W407

GET IN TOUCH

Tel: 353 (0) 42 9749479

Design Office: designs@eurotech-heating.com

TALK TO US

Please attach any relevant files for your project ( 2 mg JPG or PDF format).
Click or drag a file to this area to upload.

 

TESTIMONIALS

I choose Eurotech to install my geothermal heating & EuroSmart controls due to their reputation & I wasn’t disappointed.

Brian Heffernan, Co. Meath

I am very happy with the system. They are clearly committed and dedicated. If I could give the team more than 10/10 I would.

Niall Kavannagh, Minchluaine golf course, Co. Donegal

The whole system is very easy to manage; I like how I can control each room from the main office and lock out sensors…

Cuan Mhuire Transition house, Ballybay, Co. Monaghan

One of the selling points for me was the ease at which the system can be used and it is so economical.

Vincent McNamee, Wonderyears crèche, Co. Donegal

It’s trouble free as far as I’m concerned, I found Eurotech very helpful, only a phone call away and always a prompt response.

Private house, Tallinstown, Co. Louth

Our residents love the constant temperature & their ability to control the temperature in their own rooms.

Havenwood Nursing Home, Ballygunner, Co. Waterford

The system is very simple to operate and I find that the high level of insulation in the house compliments the overall solution.

Killacolla, Glin, Co. Limerick